Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Field Supervisor 500+ Posts
    Spot the deliberate mistake

    minimerlin's Avatar
    Join Date
    Nov 2007
    Location
    Scottish Highlands
    Posts
    854
    Rep Power
    31

    Spot the deliberate mistake

    This machine has only just been through a refurb at our workshop..........some apprentice is going to get a kick from me in the morning!!WP_20160816_13_24_14_Pro.jpg

    I was sent to look at the machine at the customer`s offices..it was jamming!

    Last edited by minimerlin; 08-16-2016 at 10:02 PM. Reason: additions
    Please do not PM me without asking first.

  2. #2
    Service Manager 1,000+ Posts
    Spot the deliberate mistake

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    1,125
    Rep Power
    22

    Re: Spot the deliberate mistake

    oh good lord. i wont even use those, all 3 get A00J563600's the finned ones wear out way too fast.
    that's funny though.


  3. #3
    Field Supervisor 500+ Posts
    Join Date
    Apr 2009
    Location
    LaPorte Indiana
    Posts
    916
    Rep Power
    28

    Re: Spot the deliberate mistake

    Paper requires some serious separation!


  4. #4
    Field Supervisor 500+ Posts
    Spot the deliberate mistake


    Join Date
    Sep 2005
    Location
    South Jersey
    Posts
    798
    Rep Power
    34

    Re: Spot the deliberate mistake

    I thought this is how you get a machine to feed multi pages. Who needs separation !!!

    I have used the ribbed rollers on the biz C203 series for the Pick up and they have worked much better than the original P/U roller. The K/M rollers wear out so fast. The service manual maint list has replacement for P/U, Feed & Sep done every 300,000. This is absurd! Lucky if you get 100,000 out of the original rollers.

    Really strange is I have had the older B&W models, i.e. biz 200 series, etc that I never had to replace rollers in the paper drawers, only replaced the ADF rollers.


  5. #5
    Senior member of CRS 2,500+ Posts
    Spot the deliberate mistake

    ZOOTECH's Avatar
    Join Date
    Jul 2007
    Location
    Insane Diego, CA
    Posts
    2,951
    Rep Power
    80

    Re: Spot the deliberate mistake

    Quote Originally Posted by minimerlin View Post
    This machine has only just been through a refurb at our workshop..........some apprentice is going to get a kick from me in the morning!!WP_20160816_13_24_14_Pro.jpg

    I was sent to look at the machine at the customer`s offices..it was jamming!
    Wasn't it checked out before going to the customer's site? It seems to me that whomever was in charge of training this apprentice, might have left out a few tools (service manual, parts manual, tech bulletins) to be used when rebuilding. This was most likely not deliberate, but more likely a lack of training IMHO.
    (three pick up rollers is kind of funny though - and I'm guessing that not one manufacturer uses that setup)

    "You can't trust your eyes, if your mind is out of focus" --

  6. #6
    Senior member of CRS 2,500+ Posts
    Spot the deliberate mistake

    ZOOTECH's Avatar
    Join Date
    Jul 2007
    Location
    Insane Diego, CA
    Posts
    2,951
    Rep Power
    80

    Re: Spot the deliberate mistake

    I did have a "fill-in set up tech" cut the 'remove this tag' (Sharp) by cutting the red ribbon, and not removing the 'lock down hardware'; 'help' does not always save you time.

    "You can't trust your eyes, if your mind is out of focus" --

  7. #7
    Senior Tech 1,000+ Posts
    Spot the deliberate mistake

    mikadonovan's Avatar
    Join Date
    May 2008
    Location
    Indianapolis, Indiana
    Posts
    1,917
    Rep Power
    47

    Re: Spot the deliberate mistake

    Lol. That's a powerful lot of pickup rollers for 1 feed unit

    NEVER ASSUME ANYTHING

  8. #8
    Senior Tech 100+ Posts mbcruzin's Avatar
    Join Date
    Aug 2013
    Location
    Murrells Inlet
    Posts
    134
    Rep Power
    11

    Re: Spot the deliberate mistake

    Quote Originally Posted by minimerlin View Post
    This machine has only just been through a refurb at our workshop..........some apprentice is going to get a kick from me in the morning!!WP_20160816_13_24_14_Pro.jpg

    I was sent to look at the machine at the customer`s offices..it was jamming!
    bwahahahahahahahahahahahahahahahahahahahahahahaha [breath].....................[breath/] hahahahahahahahahahahahahahahahahahaha


  9. #9
    Senior Tech 100+ Posts
    Spot the deliberate mistake


    Join Date
    Jul 2016
    Posts
    126
    Rep Power
    4

    Re: Spot the deliberate mistake

    Ribbed for their jamming pleasure

    When I started servicing copiers they used toaster ovens for fusers.....I'm old

  10. #10
    Senior Tech 250+ Posts Woxner's Avatar
    Join Date
    Jul 2011
    Location
    Felixstowe England
    Posts
    391
    Rep Power
    17

    Re: Spot the deliberate mistake

    tell the newbie to sand the two rollers next time !!!!!!!!!! see what he says


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here