Be my guest, Wazza. In fact, if I hear you telling a bunch of techs how you did that, I'd act very impressed, and comment what a sharp tech you are.
Kevin900
A Sharp tech indeed.
I had a Canon iR5570 snap the web out sensor arm and it kept dropping into the sensor.
I used a cable tie to keep it fastened to the fuser frame til I got back with the part.
Just yesterday I had a plastic bushing making a bad noise. I bent the metal bracket it was in and got rid of most of the noise, then saw on a desk a bottle of baby lotion, which I used to lube it and get rid of the rest of the noise.
The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen Hawking
@ Kevin900 - you get an A+ in my book for customer service
@ fixthecopier - you didn't have any grease, dude? What's up with that? :P
I didn't do anything truly scientific, like the rest of you awesome guys. I had an end-user who had a broken fin on the top cover, that actuates the top cover switch (HP printer). She told me her boss didn't want to spend any money on parts, because he wanted the printer replaced (Lexmark). She loved the machine and didn't want to part with it. I took the broken piece and melted the edge with my soldering iron, reattached it and melted the weld thoroughly. I used the iron to smooth out the surface when I was done and it looked almost like new. The smell of melted plastic is not the greatest and if I'd had fine grit sandpaper with me I'd have made it look like new, but she thought it was the greatest thing since sliced bread.
I vacuumed the machine, cleaned the covers and charged her 1 hour labor for cleaning the machine. (Took me 15 min to do the welding and 15 to clean.) her boss came in just as I was finishing up (it looked as good as new). She told him I just saved the company the price of a new machine. He smiled and signed the work order.
Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways - Coke in one hand - chocolate in the other - body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!".
I was working on a PB DM500 mailing machine. Call was for jamming when sealing envelopes that were to thin to seal. Kept crashing on the stripper blade. Any ways i accidently broke the stripper blade in half. It was that super hard plastic shit that has no flex or bend, just break. As it broke in my hand i went "Uh oh". The customer could be a bit of a dick and shouted from across the room, "what do you mean uh oh!" Quickly i replied nothing as i was pulling out the JB Kwick weld. That shit held it together until i got back 2 days later with a new part.
Ive also used that stuff to rebuild the fuser screw holes on the plastic frames sharp uses. Break out the remains, sand it up, fill in the the gap and build it up and drill a new hole and let the screw tap it. Then you tell the customer it's on it's last leg and leave.
Evil will always triumph because good is dumb.
Its all shits and giggles until some body giggles and shits...
I never leave home without my super glue and a few spare pieces of mylar..... most important pieces of kit in my bag.....
@ fixthecopier - you didn't have any grease, dude? What's up with that? :P
Sure I had grease. It was down 3 flights of stairs, and about a quarter of a mile away in my truck. I was there to replace the drum. It was 99 degrees yesterday, but with the humidity, it only felt like 106. If the noise comes back, I will take grease.
I must give props to copylady 57, whom I work with. While I was away at training a few months ago, she had a bizhub 500 that the post had broke off one end of the transfer corona. She used electrical tape to rig the tension of the wire to work til we ordered a block. It made good copies.
The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen Hawking
@fixthecopier.LOL...that's why I don't have a 3 ton tool case, so I can keep the essencials with me. . I couldn't resist messing with you and you took it pretty well. Anyone who deals with those military morons can take a little ribbing like an ace. .It was down 3 flights of stairs, and about a quarter of a mile away in my truck.
Props to copylady57.
Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways - Coke in one hand - chocolate in the other - body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!".
Bookmarks