Results 1 to 7 of 7
  1. #1
    Master Of The Obvious 10,000+ Posts
    Hoosierdaddy printtt

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Hoosierdaddy printtt

    Here's the thing: If you end your title in the word "Print" the thread is displayed in Printable View, which is nice if you're going to print it but not so nice if your want to respond to it, because all of the links have been removed. Noone can respond to a thread in Printable View.

    So if you'd like responses, all you have to do is end your title in any other word than "print". That should be easy, since there are ~150K other words you can choose. Or you can just misspell it like I did. That would make the number of choices nearly infinite, but not quite.
    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  2. #2
    Field Supervisor 500+ Posts Wild Bill's Avatar
    Join Date
    Jul 2005
    Location
    Fresno, California
    Posts
    774
    Rep Power
    55

    Re: Hoosierdaddy printtt

    Ya I noticed that. I sent him a PM; and thanks did not know that myself.
    Izzy

  3. #3
    Not a service manager 2,500+ Posts Iowatech's Avatar
    Join Date
    Dec 2009
    Location
    Iowa
    Posts
    3,933
    Rep Power
    97

    Re: Hoosierdaddy printtt

    I might be wrong, but I don't think it matters where the word "print" ends up in a post's title, I'm pretty sure it works the same way when the word shows up anywhere in the title of a post. I should probably try that to be sure though.
    Well, I just tried that on the test forum, it looked perfectly normal to me so I'm probably wrong. Sorry.

  4. #4
    AutoMajical Resolutionist 2,500+ Posts
    Hoosierdaddy printtt

    Tonerbomb's Avatar
    Join Date
    Feb 2005
    Location
    Bugaha
    Posts
    2,589
    Rep Power
    90

    Re: Hoosierdaddy printtt

    I thought this was a well known issue with the site??????????????????????
    Mystic Crystal Revelations

  5. #5
    Master Of The Obvious 10,000+ Posts
    Hoosierdaddy printtt

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: Hoosierdaddy printtt

    Apparently not, since I've posted this reply nearly a dozen times. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  6. #6
    Not a service manager 2,500+ Posts Iowatech's Avatar
    Join Date
    Dec 2009
    Location
    Iowa
    Posts
    3,933
    Rep Power
    97

    Re: Hoosierdaddy printtt

    New people might not know about that, I only learned about the "print problem" by watching others make that mistake back when I was just a lurker here. To people unfamiliar with the way CTN's internal mechanics work, it is kind of unique.
    Still, with all the technical information already here, you'd think they would search through the threads for answers and come across the times when that happens like I did.

  7. #7
    Not a service manager 2,500+ Posts Iowatech's Avatar
    Join Date
    Dec 2009
    Location
    Iowa
    Posts
    3,933
    Rep Power
    97

    Re: Hoosierdaddy printtt

    If you look in the HP forum, there's a thread titled "HP CLJ CM6040 Poor Copy Quality / Print Ok" that has been replied to, even though it initially showed up here in printable mode.
    It appears that if the
    title just below the "Reply To Thread" button is clicked on, a thread in printable view changes to a regular thread, or at least it has for me in this session anyway.
    But I'm on a computer, so I suppose that might be tough for people using their phones or something.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here