Thanks:
0
Likes:
0
Dislikes:
0
-
Multibrands Tech
250+ Posts
- Rep Power
- 27
Muratec now a Konica Minolta company
I just learned that Muratec Copiers and MFPs division has been acquired by Konica Minolta, Inc. about a week ago,
It's been a long time since I worked on one Muratec machine, (a Muratec original, not a rebranded box).
As far as I remember to change values you had to input binary codes...(1's and 0's), I don't know
how they are now on this matter...
-
Re: Muratec now a Konica Minolta company
Par for the course these days... our industry has been interesting the past several years to say the least... with mergers, buyouts, bankruptcies, etc. I think some of the Muratec boxes crossed to Konica boxes. I haven't worked on a Muratec for years.
-
Re: Muratec now a Konica Minolta company
I only worked on Muratec for a short time; their adjustments (ATT) for CQ were rudimentary, but you could 'dial' in adjustments spot on. I hope this will be a good 'marriage'.
"You can't trust your eyes, if your mind is out of focus" --
-
Re: Muratec now a Konica Minolta company
most of the boxes are the same . they use km soft ware. but the drums were keyed different. the firmware is different as well. i think you can make them say km in the splash screen
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks