Quote Originally Posted by copyman View Post
I ended up ordering a 12 ft wheelchair ramp, $500. Will let you know how it works once I get it. After talking to the manufacture the longer ramp should make it easier with only a 12 degree angle. From ground to floor of cargo van is 30".

Like I mentioned in earlier post I mostly sell 20-36 ppm models weighing less than 200lbs so hopefully this will work. Heavier production models I rent liftgate truck.
Check your vertical clearances at the SHORTEST point (Usually at the door catches)!! Last company I worked for had a 3/4 ton van with a lift gate on it, and 99% of the machines loaded in just fine...but if we had one with a single pass ADF (Canon iRAdv C5255, etc) we'd have to remove the doc feeder to get it into the van, and reattach it on site.


...forwarned is forearmed.