Thanks: 
Likes: 
Dislikes: If you do which one do you use and recommend?
Yes, the stuff works great!
No, I don't rate the stuff, I always replace worn rubber rollers.
I just use a damp cloth to clean the surface of rubber rollers that still have some tread left.
I spray them with WD40.
I hate polls, and I hate you for creating one! 
If you do which one do you use and recommend?
- Knowledge not shared, is eventually knowledge that becomes lost... like tears in the rain.
Fully qualified technician for Ricoh - Canon - Sharp - HP - Brother
Although, we have been told not to use it, our dealer still uses it on very dirty relay rollers and the hard white pressure rollers found in the paper path. The product we use is Fedron. Great smelling stuff!!And it will melt the hell out of most softer plastics.
The main reasons our dealer was told not to use it is because that over time, it will slightly shrink the rubber. At least that's what a Ricoh instructor told one of our guys while in the B140 class.
Most of the time though, like in the field, we use Spartan SD-20. Great stuff as well.
I dont believe in putting bubble gum on a problem, its worn for a reason and it will come back sooner than later.
fedron is some toxic sh!t. i don't want to be no where around it.
try cleaning grey rubber rollers and tires with WD-40. works great.
alcohol dries out rubber, WD-40 makes it like new, but like the other guy said, you can only get so much out of a rubber roller or tire and it may need to be replaced.
http://christianoutdoorsman.com/forums/
www.lewisdigital.net
Lewis Digital
630-1 Capital Circle N.E. | Tallahassee, FL 32301
Telephone: 850.222.4418
Live such good lives among the pagans that, though they accuse you of doing wrong, they may see your good deeds and glorify God on the day he visits us. 1 Peter 2:12
yeah, it is toxic... but we don't clean feed rollers with it. That's plain ignorant!!
I might have to play around with WD-40. But, I must say, I don't feel very comfortable cleaning a roller with a lubricant. We had a tech a few years ago that we found out was cleaning relay rollers with D-Ink, which has a oil base to it. It worked so well, that soon all the other techs in that shop were doing it. We didn't find out about what was going on until the shop started ordering feed tires and clutches like crazy. When we started looking at call historys, we noticed that they had cleaned the relay rollers, then was back a week later for the same thing, cleaned the rollers again, then a week later was ordering feed tires and clutches for the machine. Even then, the problems were not going away because the oil was working it's way out of the rubber, causing it to become slick again. Cleaning them with SD-20 did the trick, because it removed enough of the oil from the roller.
Granted, the D-Ink worked great for cleaning the hard rubber rollers normally found in relay areas and long hard registrations rollers, but it was not worth it. I will experiment with the WD-40 on a shop machine we have though. I'm always willing to try new things.
10-4. word of warning. do not use WD-40 on clear neaphreane(sp?) rollers. it will eat them up.
ps. WD-40 isn't really a lubricant. look at the name.
water displacement-formula 40.
invented by NASA.
its more of a cleaner and degreaser than a lubricant.
http://christianoutdoorsman.com/forums/
www.lewisdigital.net
Lewis Digital
630-1 Capital Circle N.E. | Tallahassee, FL 32301
Telephone: 850.222.4418
Live such good lives among the pagans that, though they accuse you of doing wrong, they may see your good deeds and glorify God on the day he visits us. 1 Peter 2:12
Normally I will just replace rollers that have no tread/grip left.
Paper feed separation rollers get so bald there is just no other way really.
But often I will clean ADF rollers and reg rollers with a water damp cloth.
It can be fairly suprising how smooth paper dust and toner rub off will make a roller and how much grip does remain underneath.
- Knowledge not shared, is eventually knowledge that becomes lost... like tears in the rain.
Fully qualified technician for Ricoh - Canon - Sharp - HP - Brother
It's just idiotic to clean worn rollers. Dirty rollers, thats another story...
Try "De-Solv-It" available at Gill-Roy's Hardware. Its an orange oil based cleaner/solvent that doesn't damage cover plastic or rubber. Great Stuff!
As Roller Rejuvenator goes, it's only good for cleaning toner from fuser parts & steel. It's too corrosive for rubber and plastic.
Most manufacturers recommend a soft dry towel or water, which is pretty much useless. Clearly, the engineers have never done a service call!
all rubber rejuvenator should have one purpose and that is to buy time until the new roller comes in and not as a substitute for replacing the rollers, there is no magic solution to regrow rubber that has been rubbed off by paper. I use either soap and water or wd-40, everything else if you read the warning label will state that this is toxic, carcinagenic or may cause cancer. Water wont harm you and wd-40 depending on who you ask may help with arhritis.
Get your facts first, and then you can distort them as much as you please.
We use Simple Green. It cleans the grundge off the rollers quickly, It's readily available, and it puts a little "stick" on the rollers if they are worn and we don't have a replacement at the time. It usually will last a month or 2.
Reply With Quote
Bookmarks