Over the years in this business I have come accross what I like to call Copyisms. For example:
1. If you put all the covers back on the machine BEFORE you test it, you will have to remove them due to something not working right.
2. If the panel/cover has multiple screws holding it on, tightening the screws down as you put them in will always cause you to have to loosen them all up again to get the last couple in the holes.
3. You will always have every allen wrench known to man EXCEPT for the one you need right now
4. After 2 hours of trouble shooting you finally diagnose the problem, take the machine apart to repair it and just as you get to the last screw which will let you remove the faulty part, that screw will not come out!
5. The size of the cover/panel is not in proportional to the number of screws holding it on! (Konica!)
6.Telling yourself to be very careful when putting that clip back on inveriably causes you to drop it.
Anyone have any others?
Bookmarks