Thanks: 
Likes: These images are great, just getting starting - sort of like APOD (astronomy picture of the day) from NASA.Originally Posted by Iowatech
Dislikes: 0
These images are great, just getting starting - sort of like APOD (astronomy picture of the day) from NASA.
"You can't trust your eyes, if your mind is out of focus" --
more proof that cats are assholes...
http://i.imgur.com/TGPF5Ky.mp4
The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen Hawking
Couldn't find an appropriate thread to put this in, and didn't feel like drawing attention to myself by starting a new one:
After replacing pickup, feed and separation rollers, one way clutches and torque limiter, motor and control board, I find the cause of the intermittent but damn-near constant 15-01 jam from PC-409 to be caused by the mylar guide on the inside of the tray.
I was alternately ecstatic and very angry.Mostly angry with myself for wasting so much time and money by not seeing the problem the first time. The adhesive portion of the mylar was askew ever so slightly but enough to the point where the feed assembly would attempt to feed the mylar, or it wouldn't pick up paper at all and just throw the jam due to timing.
Replaced the mylar (because it is at least two years old and in an office with higher than normal humidity 8 months out of the year) because the adhesive had failed partially and the mylar was pointing higher than it should have been. Hasn't jammed since.
Edit: this issue took four visits over a period of six weeks before I discovered the blasted mylar.
Last edited by TheBlueOrleans; 08-17-2016 at 02:00 PM. Reason: Edited to increase amount of embarrassing information. Shame is a waste of time. Accept the mistake, own it, and move on.
Somewhere there is a tree working hard to produce oxygen for you to live, NOW GO APOLOGIZE TO IT!
I sure know how that feels. Once you find the culprit, it seems obvious as hell, and how could I have missed it? =^..^=... I was alternately ecstatic and very angry.
Replaced the mylar (because it is at least two years old and in an office with higher than normal humidity 8 months out of the year) because the adhesive had failed partially and the mylar was pointing higher than it should have been. Hasn't jammed since.
Edit: this issue took four visits over a period of six weeks before I discovered the blasted mylar.
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
I play Destiny on Xbox One, how about you?
The Schwarzerneger movie explosion supercut!
Might not hurt to turn the volume down for this silliness.
I play Dota 2
1v1 ME M8 I'LL REKT U SWER ON ME MUM, and all that jazz.
How a cockroach can effect your prints...
The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen Hawking
Nah!... It's just a bug in the system. Ctrl-Alt-Del or power on/off....
Inauguration to the "AI cancel-culture" fraternity 1997...
•••••• •••[§]• |N | € | o | M | Δ | t | π | ¡ | x | •[§]••• ••••••
Reply With Quote
Bookmarks