Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8

Thread: Technology

  1. #1
    MECANOGRAPHE 1,000+ Posts zaza's Avatar
    Join Date
    Mar 2008
    Location
    ALGERIA
    Posts
    1,095
    Rep Power
    48

    Lightbulb Technology


    what do think about this technology ....
    BEST TECHNICIAN . NICE PEOPLE .

  2. #2
    Master Of The Obvious 10,000+ Posts
    Technology

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: Technology

    Have you ever installed one of these re-coated drums? Typically my used drum cores look a lot worse than the ones in the videos. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Service Manager 1,000+ Posts
    Technology


    Join Date
    Feb 2010
    Posts
    1,987
    Rep Power
    75

    Re: Technology

    Is it true that you can cover a nick with clear nail polish?

  4. #4
    Master Of The Obvious 10,000+ Posts
    Technology

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: Technology

    Only 20 years ago on machines like the Mita DC-121, DC-122, DC-131, DC-133R that did not use a drum cleaning blade. They used a cleaning corona wire. There was no physical contact during the cleaning process, consequently no problem with that lump of nail polish. The waste toner was drawn back into the developing unit and recycled. No waste toner collected.

    If you try it on a machine with a drum cleaning blade it will leave a donut shape of waste toner around the nail polish lump, and eventually a streak when the drum blade wears in one area. I hated to lose that trick ... but it just doesn't work any more. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  5. #5
    Service Manager 2,500+ Posts
    Technology

    Hansoon's Avatar
    Join Date
    Sep 2007
    Posts
    3,190
    Rep Power
    94

    Re: Technology

    That's not Technology, that's "Crapology"

    What a mess......

    Hans
    " Sent from my Intel 80286 using MS-DOS 2.0 "

  6. #6
    MECANOGRAPHE 1,000+ Posts zaza's Avatar
    Join Date
    Mar 2008
    Location
    ALGERIA
    Posts
    1,095
    Rep Power
    48

    Re: Technology

    well by way ..it is a older technology ....since long time all technician use this technology to clear all stripe drum but now all is difference..can anyone explain to use ..by any video ...greeting
    BEST TECHNICIAN . NICE PEOPLE .

  7. #7
    MECANOGRAPHE 1,000+ Posts zaza's Avatar
    Join Date
    Mar 2008
    Location
    ALGERIA
    Posts
    1,095
    Rep Power
    48

    Re: Technology

    other something ...if this technology useful in canon analog series like canon np1550..6220...6317...?
    BEST TECHNICIAN . NICE PEOPLE .

  8. #8
    Legendary Frost Spec Tech 2,500+ Posts
    Technology

    Akitu's Avatar
    Join Date
    Oct 2010
    Location
    Thompson, MB
    Posts
    2,596
    Rep Power
    97

    Re: Technology

    Quote Originally Posted by JR2ALTA View Post
    Is it true that you can cover a nick with clear nail polish?
    Yes, as long as the coating is thin enough and properly applied so as not to interfere with cleaning, else you run the risk of having the cleaning blade catch the polish and shear off some more of the drum's surface.

    Source: did it to a drum from an MP2400W Wide Format Ricoh printer the first time I changed the drum on that behemoth. Accidentally dropped it and was maybe 3 months into my career, on a secure location (hydro dam being constructed) approx. 1 hr from shop. The trailer happened to be full of a bunch of beautiful women, so naturally I assumed one of them might have some, and as luck had it I was correct.

    Polish was applied and it left visible marks for the first 50 feet of paper or so, but after it had a chance to settle in properly you couldn't tell at all, and it still applied toner and cleared it off as though there was no damage in the first place.
    Cthulhu for president! Why settle for the lesser evil?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here