Cordless bit driver

**DavePo** · 07-31-2014

Originally Posted by slimslob

Is that the charge or the Cordless Driver?

The charge. I've had the driver for two years now. Only problem is with the trigger, had it come apart and have to modify it to stay together.

**PeterG** · 07-31-2014

Originally Posted by DavePo

Several of our techs are using a 4volt Ryobi Cordless Driver. On has a small invertor plugged into his cigarette lighter and plugs the charger into that. They work great have variable torque settings and last for days.

Yeah, I use a Ryobi. Seems to tick all the boxes at a modest cost. I go for weeks without having to charge. Then just stick it on the charger overnight.

**Mr.Claire** · 08-08-2014

Originally Posted by PeterG

Yeah, I use a Ryobi. Seems to tick all the boxes at a modest cost. I go for weeks without having to charge. Then just stick it on the charger overnight.

Do you know the model number, or have a picture? Like this?

ryobi.jpg

**DavePo** · 08-08-2014

Originally Posted by Mr.Claire

Do you know the model number, or have a picture? Like this?

ryobi.jpg

That's the one.

**mikadonovan** · 02-17-2017

Ok, I've been using this driver for about six months now, and I'm sold on it. Low and Hi speed, forward and reverse, ratcheting grip. The charge lasts for more than a week at my usage level. There have been no malfunctions with it at all. Somewhere along the line I developed a little arthritis (due to so many years of screwdivin' and wrenchin'). Since I started using this, my hands rarely hurt anymore. Great purchase. The key to not stripping 4.5mm screwheads is to use a quality magnetic socket bit.

**sturmtrooper** · 02-17-2017

Originally Posted by mikadonovan

Ok, I've been using this driver for about six months now, and I'm sold on it. Low and Hi speed, forward and reverse, ratcheting grip. The charge lasts for more than a week at my usage level. There have been no malfunctions with it at all. Somewhere along the line I developed a little arthritis (due to so many years of screwdivin' and wrenchin'). Since I started using this, my hands rarely hurt anymore. Great purchase. The key to not stripping 4.5mm screwheads is to use a quality magnetic socket bit.

How cold is it where you are? I don't leave my tools in the car over night, or for long stretches in the day, but winters here are often sub zero Fahrenheit for long periods of time.