Ricoh MP C5502. Fuser error after new install of sleave.

[jhalfhide]

We have them out there. 100% it is the Yellow 806182 'C' (Hold 'C').

Got any pics of the fuser open and I can point you to where it goes.


Sent from my iPhone using Tapatalk

[Coptech]

Just walked up to a 4502. it is 107...There is an empty connector in a built in clamp next to the thermostats. It looks very much like the thermistor connectors.

the new code started with the 03 series.

[logrady2331]

Just for reference, that fuse can be purchased from HYTEK much cheaper than OEM.

[apollo]

The fuse comes taped at bottom of the fuser sleeve box dont need to buy one.

[teebee1234]

We have them out there. 100% it is the Yellow 806182 'C' (Hold 'C').

Got any pics of the fuser open and I can point you to where it goes.


Sent from my iPhone using Tapatalk

Never say you're 100% if you're not 100%. It is 107

[Jammed]

Never say you're 100% if you're not 100%. It is 107

Okay. It's fixed. I found where the fuse goes. Put fuser back in. Code came back. Got into sim with "Yellow" 107 "Clear". I swear it would not let me in. I'm guessing the fuse blowing authorized the service mode.????.... Any who....long story. Finally got it reset and running. Thank for all the help!!

[Copierdocisleofman]

I agree with the people who say its yellow reset key 107 c key(not the C/stop key), 806182 is on the MPC3503 etc series not the MPC3502 series

[impetus73]

Press the yellow physical key, then 107, then press and hold the grey/brown C button for 4 seconds.

The fuse goes as shown in the pictures:

IMAG0582.jpgIMAG0583.jpg