Hi Guys
Have an old Ricoh 1018d which came in as a spare. Low useage just 50000 copies. Prints were not great slighty gritty feel and grey background usual dev problems however!!! I have fitted new drum, blade, charge and cleaning rollers. New Dev and new toner installed. Initialised dev as usual. Worked fine first few copies then grey band appeared about one inch wide on back of copies again usual problem when dev is out and again slight greyish background on copy very slight and also the very slight gritty feel to the paper not as bad as before work was carried out). Never had this before usually once the PCU is rebuilt everything is fine. Any ideas would be appreciated.I was wondering if the Dev was bad although it isn't that older stock probably 12 to 18 Months old
Cheers
UK Rog
Bookmarks