Guys, I am having a problem configuring FTP scan in this model.
SITUATION.
2 machines: MP C2003sp(IP address:10.20.5.24x) and MP CW2200SP(IP address:10.20.5.2x)
one desktop (IP address:10.20.11.5x)
The two machines are connected to the network. The desktop has an access to these two machines. FTP scan is already configured in MP C2003sp and it is working fine. I am the one who did the configuration for MP C2003sp.
I did the same procedure in MP CW2200sp but it is not working. So I start again from the scratch and create new user. I thought the previous setup is conflicting with the new setup of FTP scanning in MP CW2200SP. But still I got the same problem. Any ideas? Do you think we need to update the firmware?
Bookmarks