Dislikes: 0
Is there an interval that it repeats? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Fuser pressure is not set.
That is why you are getting threads of toner.
Are both the pressure springs engaged?
Why do they call it common sense?
If it were common, wouldn't everyone have it?
looks like developer dusting....did you vacuum the dev and pcu unit? is the cleaning unit set correctly?
If it's possessed by the devil, then you need to install the "Exorcism SD card V2" in the lower SD card slot, and press "Start Exorcism" on the menu. :-D Then burn the card afterwards.
[Quote = blackcat4866; 478616] ¿Hay un intervalo que se repite? = ^ .. ^ = [/ Quote]
rare, most bad, just it comes out pretty well when printed upside down
[Quote = nmfaxman; 478617]. No se ajusta la presión del fusor
. Esa es la razón de que está recibiendo hilos de tóner
? ¿Son ambos los resortes de presión involucrados [/ quote]
It has to be something before the melter in a few thousand copies the duplex is full of toner.
[Quote = Codex; 478659] parece desarrollador polvo .... qué aspirar la unidad dev y PCU? es la unidad de limpieza establecido correctamente? [/ quote]
It is very possible, often wipe everything. I want to ignite. Hahaha
[Quote = impetus73; 478668] Si está poseído por el diablo, entonces usted tendrá que instalar el "exorcismo tarjeta SD V2" en la ranura para tarjetas SD inferior y pulsar "Start Exorcismo" en el menú. -D Luego quemar la tarjeta después. [/ Quote]
I made the sign of the cross several times in the panel, but without success, I believe that failure to do so without holy water. Today at night I will behead 2 roosters and I'm going to give an offering, I think this and a ball bearing of the magnetic cylinders that are a little hard going to help. tomorrow when you have the spare tale of exorcism.
Re: Mp 9000 possessed by the devil
Sandmanmac
I do not understand because you punished me with -10 to my reputation, I'm waiting for some spare bearings to finish repairing the machine, I live in a country where it is not easy to get spare parts, in fact I had to learn to design in SolidWorks to make parts replacement in 3d machines, be patient, next week I'll report how I was with this problem, I think between the pressure of the fuser and the ball bearing unit revealed this mystery, but I would like to repair this quick score that you put me, I'm just here to help in what little information and share it, it's not a game to me. I will share with you some pictures of the prints in 3d gears and other pieces I've designed, even a paddle roller does not come to replace the developer unit Aficio MP 7500 1075/2075.
I do not love you
Posting Permissions
Thanks: 
Likes: 
Reply With Quote
Bookmarks