how to install a new copier ricoh 7502
how to install a new copier ricoh 7502
Easiest method to follow is the installation instructions in the service manual.
It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.
Hit it.
You might ask for a manual and latest firmware at the place you bought the machine (and parts in the future).
Plug it in, turn it on, load it with paper and toner, then copy till your heart's content.
When you say "INSTALL" what condition is it in?
New out of the box there is no Developer, etc. in the machine. The shipping safety stuff you have to remove should have tags attached.
If all of the tape & tags have been removed already, it's probably mechanically ready to go. You should be able to use the Operators manual to learn how to setup the networking, user codes and what not.
If that's the case let us know what you're trying to enable/assemble & somebody will give you all kinds of helpful hints here.
For point of clarity, are you talking about the B/W MP 7502 or the color MP C7502? If it is the MP 7502, then it is pretty much the same as all previous high volume, 60 - 90 page, machines. If you are talking about the color MP C7502, if do not have any training on the pre-production color machines you are better off not touching it.
Even with thraining I try to avoid the C modelIf you are talking about the color MP C7502, if do not have any training on the pre-production color machines you are better off not touching it.
Bookmarks