Hi, All. I was working on the finisher sponge rollers on this B246. After I finished, I switched the machine on and 3 seconds later the machine went dead. It is on a dedicated 20amp circuit. After the electrician checked and reset the breaker, I attempted to fire up the machine(all peripherals had already been disconnected) and it immediately popped the breaker again. With the machine still plugged in and power switch off, the breaker was reset and there was a loud pop in the machine, and my customer said she smelled something burning. I removed the rear cover and checked the PS fuses, all good. I have given the part # for the power supply to my boss as I don't know of anything else it could be. Have any of you guys seen this one before on this model?
Bookmarks