Results 1 to 4 of 4
  1. #1
    Trusted Tech 50+ Posts johnny32's Avatar
    Join Date
    Oct 2007
    Location
    cork
    Posts
    88
    Rep Power
    21

    ricoh mp6002 sc 204

    Hi all
    Wondering if i could get some help with an sc204 on this model. Machine service manual stated its to do the laser unit. Following thw manual i have changed the laser driver board to no avail so followed it up by changung the polygon motor again to no avail and finally the harness between the two. This is where i have stalled and am looking for a solution urgently. Any hints tips greatly appriecated.


  2. #2
    Trusted Tech 50+ Posts
    Join Date
    Oct 2008
    Location
    Cape Coral, FL
    Posts
    53
    Rep Power
    19

    Re: ricoh mp6002 sc 204

    A lot of these machines are running pretty dirty. Probable the laser sync detector is covered in toner (its right next to the toner recycle unit on the right side. You take off the right upper cover, a fan and bracket, and you should see a square sensor attached to the laser on the front side of the machine (upper left side looking from the side). Its a little tricky to get out, but cleaning it should resolve your code.


  3. #3
    Trusted Tech 50+ Posts johnny32's Avatar
    Join Date
    Oct 2007
    Location
    cork
    Posts
    88
    Rep Power
    21

    Re: ricoh mp6002 sc 204

    Quote Originally Posted by jfbar1 View Post
    A lot of these machines are running pretty dirty. Probable the laser sync detector is covered in toner (its right next to the toner recycle unit on the right side. You take off the right upper cover, a fan and bracket, and you should see a square sensor attached to the laser on the front side of the machine (upper left side looking from the side). Its a little tricky to get out, but cleaning it should resolve your code.
    Thanks for the info, so cleaned laser sync detector board with no joy. Found on line that it could be a false code for the drum ground so took it out and cleaned and also found a buid up on the drum shaft itself so cleaned and since then no issues so far.


  4. #4
    Technician
    Join Date
    Jan 2017
    Location
    kuala lumpur,malaysia
    Posts
    12
    Rep Power
    2

    Re: ricoh mp6002 sc 204

    i had this problem before....just clean contact pin behind drum unit.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here