Thanks:
0
Likes:
0
Dislikes:
0
-
Ricoh SP 5210SR "processing" message while scanning
This message locks up machine. They cycle power and it works for awhile. Any ideas?
-
Re: Ricoh SP 5210SR "processing" message while scanning
With any Ricoh, make sure your firmware is ALL up to date; there were several new revisions after July 29/2015. Secondly, if you have the machine going into Energy Saver Mode you may want to turn your settings OFF - Ricoh's seem to have issues waking from Sleep Mode.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks