Ricoh SP C440

[sandmanmac]

As she said, she is on Facebook. I see posts daily from both Debs and gwaddle.

I understand Tim, but I cancelled my Facebook account nearly 10 years ago, and have no intention of opening another one, so from my standpoint, it's just really nice to see her here again for a change

[Oze]

Was there ever a resolution to this problem as I have one doing exactly the same thing.
There are lights on for the network, but cannot access WIM or ping device.

Hello, by the way, it’s been a long time...

Welcome back Debs

[Debs1964]

Thanks for the welcome backs. I've ordered a PSU, BCU and controller board, I'll let people know what it was when (if) I fix it

[Debs1964]

OK, so, much to my surprise, it was the controller board. Obviously I tried the PSU and BCU first!!
But, once I got the screen back it showed an SC312, I checked, and rechecked all the connectors, even stripping it back down again to check the connections onto the HV board, just in case I had managed to dislodge a connector, I removed and reseated the K PCU a couple of times, but still SC312. Out of sheer desperation I rebooted the printer with the K PCU removed, then refitted it once it told me to reseat PCU, et voila...it only blooming worked. That was a fun 5 hours!!!