MPc3502. Tray # 2 will only show 8.5 x11 length wise. I cannot set the tray settings to auto detect because there is none within the user tools\tray settings. I have updated all the firmware, changed the drawer switch (just because) tried another tray assembly, no change.
Any ideas?
TRay 2 settings.jpg
Under user tools / intitial settings / general features / see if "small paper size tray" is turned on for tray 2 if it is turn it off. This is only turned on when an envelope tray is installed which wont allow wide edge paper of that size.
You might have to turn the machine off and back on if you do change it from on to off in order for it to take effect
That is exactly what it was. I have never seen that before. THANK YOU for the info.
No problem, glad it worked.
This has just saved my bacon - perfect, thank youOriginally Posted by Counsel
_____________________________________________
Knowledge is knowing a tomato is a fruit.
Wisdom is knowing not to put it in a fruit salad.
www.inception.co.uk
www.inception-store.co.uk
Posting Permissions
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks