Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    pgower
    Guest

    Color Calibration on LD525C

    I have an ld525c that prints b/w fine. On the color, they are not correctly aligned. By going to the tools/maint/color registration it attempts to run then comes back with a color registration could not be performed message. Is there another way to do this ? I know on the old b/w ones you went to the clear modes with a few other keys that I now can't remember, haven't dealt with one in a few yrs. Any help would be greatly appreciated. Thanks

  2. #2
    AutoMajical Resolutionist 2,500+ Posts
    Color Calibration on LD525C

    Tonerbomb's Avatar
    Join Date
    Feb 2005
    Location
    Bugaha
    Posts
    2,589
    Rep Power
    90

    Re: Color Calibration on LD525C

    perhaps you should introduce your self in the newbie check in forum, then search the forums for the info you request as it has been posted many times before......
    Mystic Crystal Revelations

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here