Results 1 to 10 of 10
  1. #1
    Technician
    Join Date
    Apr 2016
    Location
    Melbourne FL
    Posts
    13
    Rep Power
    17

    Question no color pulse on 20 pin keycounter when printing

    Hi, I have a Ricoh 3002 using the 20 pin key counter port. It gives a 5v color pulse on in A4B4 when color copies are made, with a short 24v pulse on A10B10 for paper exit. However I am not able to get the color pulse when prints are made only when copies. Is there a function I am missing or the Ricoh does not provide a color pulse when printing is selected? Please help ! Many thanks!

  2. #2
    It's not easy being green 1,000+ Posts Cipher's Avatar
    Join Date
    May 2006
    Posts
    1,309
    Rep Power
    57

    Re: no color pulse on 20 pin keycounter when printing

    The key counter interface is just for photocopying, normally to be used with a external billing device of some type.

    You can do basic print job counting by enabling user codes on the MFD and entering user codes on the print driver(s), but for more comprehensive print job auditing and billing you would need to purchase an software solution.

  3. #3
    AutoMajical Resolutionist 2,500+ Posts
    no color pulse on 20 pin keycounter when printing

    Tonerbomb's Avatar
    Join Date
    Feb 2005
    Location
    Bugaha
    Posts
    2,589
    Rep Power
    90

    Re: no color pulse on 20 pin keycounter when printing

    This machine requires the counter interface type A for any external counter device..........................
    Mystic Crystal Revelations

  4. #4
    Technician
    Join Date
    Apr 2016
    Location
    Melbourne FL
    Posts
    13
    Rep Power
    17

    Re: no color pulse on 20 pin keycounter when printing

    Quote Originally Posted by Cipher View Post
    The key counter interface is just for photocopying, normally to be used with a external billing device of some type.

    You can do basic print job counting by enabling user codes on the MFD and entering user codes on the print driver(s), but for more comprehensive print job auditing and billing you would need to purchase an software solution.
    Thanks, this has worked on other copiers, Sharp, Xerox, Konica Minolta, but the Ricoh has limited me to just a paper out signal and no color signal when printing. I use the "optional counter interface type A" to get the 20 pin connector. I need a hardware solution without software. Would anyone know which user codes to enable on the MFD?

    This what I have currently:

    User Tools

    - System Settings
    - Administrator Tools
    - External Charge Unit Management
    - Copier- Need to select Full Color, Black & White, Single Color, Two Color
    - Printer- Need to select Color, Black & White


    Service SP settings
    SP 5113-1 4: Coin Rack
    SP 5113-2 *0:None
    SP 5120 2
    SP 5121 0

    Thanks!

  5. #5
    Technician
    Join Date
    Apr 2016
    Location
    Melbourne FL
    Posts
    13
    Rep Power
    17

    Question Re: no color pulse on 20 pin keycounter when printing

    Quote Originally Posted by Tonerbomb View Post
    This machine requires the counter interface type A for any external counter device..........................
    Thanks, I have one on the machine. I currently use:

    User Tools
    - System Settings
    - Administrator Tools
    - External Charge Unit Management
    - Copier- Need to select Full Color, Black & White, Single Color, Two Color
    - Printer- Need to select Color, Black & White

    Service SP settings
    SP 5113-1 4: Coin Rack
    SP 5113-2 *0:None
    SP 5120 2
    SP 5121 0

    But can not get a color pulse on A4B4. It only seems to do this on the Ricoh. Any ideas? Thanks!!

  6. #6
    Retired 10,000+ Posts
    no color pulse on 20 pin keycounter when printing

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,128
    Rep Power
    989

    Re: no color pulse on 20 pin keycounter when printing

    As Cipher said, the key counter port is ONLY for copying.

    From the fact that you said in your last post that you set SP 5113-001 to 4 for coin rack tells me that you are trying to use this in vending/coin-op setting and are wanting to sell prints as well as copies. You will need to set up user authentication to do this. You will also need to setup Print Volume Limitation, see Managing Print Volume per User in the Security Guide of the Operation Manual. Set Machine Action When Limit is Reached to Stop Job. When someone wants to print, he/she is sold a user number with the desired number of prints. User code is entered in the driver and the user can make that number of prints.

  7. #7
    Field Supervisor 500+ Posts Zeldaman's Avatar
    Join Date
    Mar 2011
    Location
    Stuttgart/Baden Wuerttemberg
    Posts
    940
    Rep Power
    47

    Re: no color pulse on 20 pin keycounter when printing

    Hi there!
    For restricting colour-printing you have to set the sp 5894 to 1.
    Greetings...

  8. #8
    Technician
    Join Date
    Apr 2016
    Location
    Melbourne FL
    Posts
    13
    Rep Power
    17

    Question Re: no color pulse on 20 pin keycounter when printing

    Quote Originally Posted by Zeldaman View Post
    Hi there!
    For restricting colour-printing you have to set the sp 5894 to 1.
    Greetings...
    Hello, thanks for your posts and trying to help me. I have a mechanical counter connected to the 20 pin connector that shows how many copies/prints the customer made. Another counter that activates when color copies are made so we can tell how much to charge the customer. The first counter works on the 24v on pin 10 (A&B), enable is pin 9(A&B). The color pulse activates counter#2 with a built in relay. So if someone makes 4 B/W copies and 10 Color copies we will know and charge accordingly. If they use the USB thumb drive or print from the computer, it will only show B/W prints, no 5v color signal when color prints are made. 5v Color signal seems to work only when color copies are made, not color prints.

    It has been frustrating, called our local Ricoh guy and he did not know. There is another location with a Xerox and sharp with the same setup, works just fine although the wiring is different but the machine identifies color prints not just color copies.

    Hope this helps shed some light and explain my problem a bit better.

    Thanks guys!

  9. #9
    Technician
    Join Date
    Apr 2016
    Location
    Melbourne FL
    Posts
    13
    Rep Power
    17

    Re: no color pulse on 20 pin keycounter when printing

    Quote Originally Posted by Zeldaman View Post
    Hi there!
    For restricting colour-printing you have to set the sp 5894 to 1.
    Greetings...
    Don't need to restrict color printing but get a signal when it is done. Copying gives out a color signal but no when printing.

  10. #10
    Technician
    Join Date
    Apr 2016
    Location
    Melbourne FL
    Posts
    13
    Rep Power
    17

    Question Re: no color pulse on 20 pin keycounter when printing

    Quote Originally Posted by briantrela View Post
    Don't need to restrict color printing but get a signal when it is done. Copying gives out a color signal but no when printing.
    I believe the SP settings are not set properly. Not sure which ones activate the color pulse on printing. Has anyone worked on these settings before? thanks!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here