Results 1 to 5 of 5
  1. #1
    Service Manager 2,500+ Posts rthonpm's Avatar
    Join Date
    Aug 2007
    Location
    Pennsyltucky
    Posts
    2,790
    Rep Power
    108

    1022 paper feed clutches

    I've got one of these old dogs in a low volume environment that needs paper feed clutches. I have a set for the 2022 and higher models, which I would think are compatible, but before I drive a couple of hours away I want to make sure that I'm not going to need to end up ordering an older set of clutches.

  2. #2
    Service Manager 2,500+ Posts
    1022 paper feed clutches

    sandmanmac's Avatar
    Join Date
    Feb 2009
    Location
    Toronto, ON
    Posts
    3,885
    Rep Power
    159

    Re: 1022 paper feed clutches

    You're good to go.
    I think the older style just had the locking clip attached to the clutch - maybe even the early 2022's
    The new style clutch just needs a plastic C-clip to hold it on

  3. #3
    Service Manager 2,500+ Posts rthonpm's Avatar
    Join Date
    Aug 2007
    Location
    Pennsyltucky
    Posts
    2,790
    Rep Power
    108

    Re: 1022 paper feed clutches

    Thanks for the confirmation. Most of my business now is IT related, but I've had a few reliable low volume customers that have older equipment that I need to visit maybe twice a year just to check up on. I've let most of the older 22/27 models stay out in the field since all of their PM parts are compatible with the newer models, plus they're just so damned reliable.

  4. #4
    Retired 10,000+ Posts
    1022 paper feed clutches

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,128
    Rep Power
    989

    Re: 1022 paper feed clutches

    Quote Originally Posted by rthonpm View Post
    plus they're just so damned reliable.
    Until the plastic flanges that hold the hot roller bearings break. I even had on where on of the plastic posts that hold the cleaning roller bushing break. Cleaning roller would slip out of position and cause one end or the other of the pressure roller bearings to kick out of place.

  5. #5
    Service Manager 2,500+ Posts rthonpm's Avatar
    Join Date
    Aug 2007
    Location
    Pennsyltucky
    Posts
    2,790
    Rep Power
    108

    Re: 1022 paper feed clutches

    Quote Originally Posted by slimslob View Post
    Until the plastic flanges that hold the hot roller bearings break. I even had on where on of the plastic posts that hold the cleaning roller bushing break. Cleaning roller would slip out of position and cause one end or the other of the pressure roller bearings to kick out of place.
    Just use the heat tube bearings for the 35/45 series with the extra ring. It rests on the metal sides of the fuser and keeps the heat tube in place.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here