Ricoh C2550 faded printing

[nysamara]

Hi!

I bought a damaged Ricoh C2550 it initially had the cyan toner in the black and the toner was mixed. I cleaned the hopper and changed all the developers and drum units. I also changed the transfer belt and the fusing belt. By error at the beginning I did a factory reset... Now that I have it working the printings are faded. I tried changing the bias and with that change i observed a little of improvement. Any suggestion? Is the factory reset the problem?

[sandmanmac]

Factory reset may not be the entire problem, but you'll never get it right until you re-enter all the data from the birth certificate (if you have it), and see where you are after that.

By the way...I'm not personally aware of ANY situation that a complete factory reset is ever a good idea.
Please correct me if I'm wrong

[Lagonda]

..........By error at the beginning I did a factory reset...

Whoops!!! First up put the biases back where they should be, usually they never need touching. Then go looking for the copiers "birth certificate", thats all the factory settings that got adjusted as it came off the assembly line. It should be behind the instruction sheet on the inside of the front door. These are all the setting that you have wiped so put them all back into the SP settings.
Then go into User Tools and under Maintenance run ACC (Auto Colour Calibration) and see what goes.

[nysamara]

What if I dont have the birth cert?

[Lagonda]

What if I dont have the birth cert?

I hope you didn't pay too much for it..............

Actually it shouldn't be that much of a drama as the settings are only fine tuning but the copier is much happier if its settings are correct. Can you check the birth certificate from another copier?

[nysamara]

I hope you didn't pay too much for it..............

Actually it shouldn't be that much of a drama as the settings are only fine tuning but the copier is much happier if its settings are correct. Can you check the birth certificate from another copier?

I can try with a tech... Or where can I download a copy?

[Lagonda]

I can try with a tech... Or where can I download a copy?

They are individual to each copier so I would only use one as a rough guide. Sorry, but don't have any MP C2550's around the office at the moment so if you can wait until I get out to the warehouse and rat through our trade-in copiers i'll see if I can find one for you.

[Zeldaman]

Hi there!
Sometimes teh "dear" customers find the birth-certificate (but a jam, they don´t!!!!) & throw it away. For this reason i have afolder on the laptop called NVRAM. Every new system that´s installed is in this list. Only a little sd-card (16 MB, an old RICOH-card for example ) is enough, sp 5-824 & you have the datas for work in the future.
This saved my day 2 times last year, won´t miss it.
Greetings...

[Polarbear]

They are individual to each copier so I would only use one as a rough guide. Sorry, but don't have any MP C2550's around the office at the moment so if you can wait until I get out to the warehouse and rat through our trade-in copiers i'll see if I can find one for you.

As far as i know the "birth certificate" can be requested from Ricoh, as I was told they keep this data on file for 5 years after production date?

[slimslob]

Hi there!
Sometimes teh "dear" customers find the birth-certificate (but a jam, they don´t!!!!) & throw it away. For this reason i have afolder on the laptop called NVRAM. Every new system that´s installed is in this list. Only a little sd-card (16 MB, an old RICOH-card for example ) is enough, sp 5-824 & you have the datas for work in the future.
This saved my day 2 times last year, won´t miss it.
Greetings...

Helps if you are the original seller of the machine but not if you inherit one.