Originally Posted by
Corrado
Morning All,
I have an MP C5502 that is repeatedly giving SC 541. I have replaced the two thermopiles, swapped fuser units, swapped thermistors, reduced the temperature of the print ready center temperature to 163 degrees. This code is still persisting. I'm resetting it, sometimes it won't come up for 2 weeks, sometimes next day. Approx 1.2M BK and approx 500K COl. My Next thought is to replace the controller board however this is obviously an expensive route and would rather avoid it if possible.
Any bright Ideas would be greatly appreciated, Thanks
Bookmarks