I have an ancient piece of hardware here that I have swapped the High Voltage power supply board and the EGB with another identical working unit but I still have the SC 300 code returning. We can not order parts for this and the client is pretty admit about getting this back. Am I missing anything?
angeltx
Check the pressure springs on the PTR assembly. I've had them cause SC300 on an SPC232.
It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.
Hit it.
From Gooses Guide
SC 300 High voltage power output error: Defective HVPS SC 300 High voltage power output error: Defective EGB SC 300 High voltage power output error: Refer to TSB bulletin #11
TSB #11 has to do with a change for the power pack.
Yes, the satisfying crash from throwing this POS in the bin. Bite the bullet and tell the customer it ain't worth repairing and parts are no longer available. They will thank you for it in the long run.Originally Posted by angelntx
........... Am I missing anything?
At least 50% of IT is a solution looking for a problem.
Posting Permissions
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks