Ricoh Aficio MPC3001 Error Code 441

[Orion2010]

Dear all,
I have a problem with Rico C3001.
First of all, there was a problem with quality of printing (displayed line ). I cleaned all developed and everything it was OK . After 4 days the make paper jam and after that she make a noise and appears error code sc441.
i re-clean again everything but the problem its still appear. can you give me any suggest?


thank you

[1nevster]

ITB (Image transfer Belt) has ripped?

[Orion2010]

ITB (Image transfer Belt) has ripped?

yes it its little one on the sides

[1nevster]

yes it its little one on the sides

The massive unit above all the colour drums probably has a rip on the belt, usually near the back, locks up the motor because it can't drive, it's called the itb or image transfer belt NOT the ptr or transfer roller i think your referring too

[teebee1234]

The massive unit above all the colour drums probably has a rip on the belt, usually near the back, locks up the motor because it can't drive, it's called the itb or image transfer belt NOT the ptr or transfer roller i think your referring too

I think he's saying "yes, there's a little rip on the side of the belt".

[1nevster]

I think he's saying "yes, there's a little rip on the side of the belt".

Apologies, misunderstood.

[Orion2010]

I think he's saying "yes, there's a little rip on the side of the belt".

it was even earlier but not make noise

[1nevster]

it was even earlier but not make noise

Maybe try a new ITB unit. The rip in the belt is probably getting stuck by the cleaning unit and locking the drive motor causing your error code

[slimslob]

it was even earlier but not make noise

The tear has probably gotten bigger.

[jonhiker]

replace the belt, the error should go away.