Ricoh MP 171 SPF Firmwarefiles and how to upgrade the Firmware?

[pingpong]

Hi Experts,

i owned a Ricoh MP 171 SPF MF Printer some years ago. Now, I have trouble with the Scan2Folder Function on current Windows Releases like Windows 2012 R2, Windows 10.
I assume, that the Printer don't support the SMB3 Protocol.

Please let me know, how can I obtain the current releases (last available Version of Firmware) for my printer. Is there any Ricoh Reseller on this forum?
I get an older version of Firmwarefiles. But how can I load this files into the printer. Is there any howto available?

Thanks for your help!

Best regards from germany
Michael

[pingpong]

Hi Terramobil,

I've got at this time *.fwu Files. Is there any information about the doing of the firmwareupgrade.

Today i have four *A.fwu, *B.fwu,*C.fwu,*F.fwu Files. Is there any SD Card Namings, Folder Namings pay for?

Thanks
Michael

[NeoMatrix]

Hi Terramobil,

I've got at this time *.fwu Files. Is there any information about the doing of the firmwareupgrade.

Today i have four *A.fwu, *B.fwu,*C.fwu,*F.fwu Files. Is there any SD Card Namings, Folder Namings pay for?

Thanks
Michael

The following post might assist.

Ricoh Kyocera Firmware Multiple Zip-File Extraction


HTH

[hussam]

Hi Experts,

i owned a Ricoh MP 171 SPF MF Printer some years ago. Now, I have trouble with the Scan2Folder Function on current Windows Releases like Windows 2012 R2, Windows 10.
I assume, that the Printer don't support the SMB3 Protocol.

Please let me know, how can I obtain the current releases (last available Version of Firmware) for my printer. Is there any Ricoh Reseller on this forum?
I get an older version of Firmwarefiles. But how can I load this files into the printer. Is there any howto available?

Thanks for your help!

Best regards from germany
Michael

Hello...

You need to upgrade the NCS firmware to version 9.06a, required firmware file is: D0675526E_LRC0451.fwu, folder naming on SD card should be: \romdata\D067\D0675526E_LRC0451.fwu

Prior to install, disconnect network connections & Fax lines. Refer to the Firmware Update Procedure in the Service Manual

The following SMB-based GW functions will work with Windows 8, 8.1, 10 and Windows Server 2012 with this firmware.


- Scan to SMB
- Fax Folder Transmission
- Fax Forwarding

Best Regards from Jordan
Hussam

[Zeldaman]

Hi there!
I would use max 2GB-card on the STELLA´s. A tip from RICOH after we toasted 2 controller-boards on a 161 & a 201: update engine, then sys-copy after that the other modules. RICOH said updating all modules at a time goes 99 times OK, but it can kill the ctrl-board as it happens to us. Happy weekend.
Greetings...

[pingpong]

Hi,

I've got the Firmwareupdate with the Files I got today from Ricoh.

All works perfectly. But as I want to upgrade the Scanner, I got the Error E44 ....

With SD-Card:
Download Error
Scanner
Cad No.: 1/1. E44

Without SD-Card
Reboot after card insert.
STLC4a_scn
Card No.: 1/1 E32

What can I do? :-(

Hope you can help me.

Best regards
Michael

[slimslob]

I try to stay with a 1GB or 512MB SD cards. All early models using SD cards for upgrade would not take anything larger than 2GB and would still error on a large portion of 2GB cards. Reformatting would not help as it had to do with the actual card capacity, not all are the same. If you cannot find a 1GB SD card, you can use MiniTool Partition Wizard to create a 1GB partition on a larger card.

https://www.partitionwizard.com/

[KenB]

If the machine is working, and you can get the remote version of the firmware (the .rfu version), you can update using the WIM.

You can also FTP the .rfu file to the machine. It will work equally as well.

FWIW, I've been told to update System, then Network, then Engine, then anything else after that.

I know that is documented somewhere, I think it was in the firmware packaging tool for Streamline.

[pingpong]

Hi Experts,

please notify my post #8. I don't find any solution to start the printer. I see only the both Error Messages. Download Error E44 ...

Thanks in Advance!

Best regards
Michael

[hussam]

Hi Experts,

please notify my post #8. I don't find any solution to start the printer. I see only the both Error Messages. Download Error E44 ...

Thanks in Advance!

Best regards
Michael

Code: E44
Cause: Controller program error
Necessary Action: - Store the correct data in the SD card. - Replace the controller board.

You need to reinstall the program.
If the firmware update program is interrupted (for example, by a power failure), keep the SD card inserted and turn the mains switch off and on. The firmware update program restarts. If you do not do so, the message "Reboot after Card insert" is displayed when you turn the main switch on.