Ricoh C4501 PS Card Problem

**bsm2** · 08-30-2016

Got Ricoh C4501 with PS card but the copier does not see the card?
Under printer PS option not there?

**TonerMunkeh** · 08-30-2016

Is it the right type? 5501 for these things I think.

**bsm2** · 08-31-2016

Originally Posted by TonerMunkeh

Is it the right type? 5501 for these things I think.

Yes, is there an sp mode that may be turned off
this was a use copy machine

**MitchD** · 08-31-2016

Originally Posted by bsm2

Yes, is there an sp mode that may be turned off
this was a use copy machine

No SP that turns it off or on. I'm wondering if they just installed a postscript card from another machine before selling it to you. You cant just swap the PS from machine to machine

**slimslob** · 09-01-2016

Are you getting a message such as "THIS SOFTWARE HAS ALREADY BEEN INSTALLED ON ANOTHER MACHINE"? If not the the PS card is defective. Most like if you put it in a PC, it will not have anything on it. If it does have files on it either they are not the correct files or someone has put the card in their PC and their PC was infected with a virus that spread to the card.

**sandmanmac** · 09-01-2016

Originally Posted by bsm2

Yes, is there an sp mode that may be turned off
this was a use copy machine

I have to ask....You do have it installed in SLOT 1, Correct?

**NeoMatrix** · 09-01-2016

Does the MPC4501 have to migrate the postscript SD card software onto the print/scan SD card like the MPC4500? After the migration of the PS software there should only be a single SD card left in the machine.

**slimslob** · 09-01-2016

Originally Posted by NeoMatrix

Does the MPC4501 have to migrate the postscript SD card software onto the print/scan SD card like the MPC4500? After the migration of the PS software there should only be a single SD card left in the machine.

MP C4501 has embedded print/scan, no SD card required.