MP4002 Energy saver mode

[Slakkie4x2]

Hi,

It worked fine. It just started last week doing this.

It's not the timer

Thanks

[slimslob]

Hi,

It worked fine. It just started last week doing this.

It's not the timer

Thanks

Since it is a user function, someone might have changed it or someone might done a memory clear that reset it to factory default of 10 seconds. If the machine has JAVA installed and started, the default time can cause other problems when coming out of energy savings.

[Mark Bbb]

ADF original set sensor might be broken.
Had this issue on a mpc3002

[Slakkie4x2]

Hi all. Just a quick update on this case. The large board on the ops panel was faulty. Replaced the board, now the energy saver button is working correctlly. No firmware or user error.