loud noise.ricoh mpc2050 ,after 20-30 prints.replaced new fuser group, same problem. urgent
https://www.youtube.com/watch?v=HXhiK6mibmg
loud noise.ricoh mpc2050 ,after 20-30 prints.replaced new fuser group, same problem. urgent
https://www.youtube.com/watch?v=HXhiK6mibmg
Last edited by tullio; 09-16-2016 at 07:26 PM.
try
sp 1-121-001 set to 0
sp 1-121-002 set to 0
sp 1-121-003 set to 0
I Used To Live To Fix Things Now i Fix Things To Live
Ok .......
Noise location? Type of noise? Is it grinding,squeaking or groaning?
Also if you replaced the fuser components and you bent the fusing stay it will make a noise when reinstalled
same problem????????????????
I've had that noise from the compression springs in the drum unit.Sometimes its one drum and sometimes multiple. Have you ran each component individually through the output sp? Run just the drum motor for each unit and see if you get the noise.
already 'done, no problem found.
I've also had this issue. Solved by replacing the springs that press the lube bar onto the drum with new springs according to the TSB
Spring TSB.pdf
Here is the TSB.
You can isolate the problem using output check, sometimes it's only one drum....try the spring TSB, o my case i solved the problem.....newer cpus have the new springs
now in italian:
Ciao , prova ad isolare il problema usando l'output check, spesso il problema si presenta solo in uno dei tamburi, nel mio caso ho risolto modificando la molla che tiene premuto la lubricant bar sulla spazzola.Comunque questo problema e stato risolto nei drum piu nuovi.
Memento Audere Semper
Bookmarks