Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: MPC6502

  1. #1
    Junior Member mike ward's Avatar
    Join Date
    Jul 2013
    Location
    Jackson
    Posts
    2
    Rep Power
    0

    MPC6502

    Tech has rebuilt Fuser Unit on Ricoh MPC6502 and when put back in- he now gets the message " Fusing Unit set incorrectly":

  2. #2
    Not a service manager 2,500+ Posts Iowatech's Avatar
    Join Date
    Dec 2009
    Location
    Iowa
    Posts
    3,933
    Rep Power
    97

    Re: MPC6502

    Is the fuser actually set correctly? Sorry, we can't see it. Other than that, check all the connections that were even slightly disturbed during the rebuild. Just a guess, but it is likely one of them is insufficiently connected (there is a surprisingly small difference between a fully seated connector and one that is not after all).

  3. #3
    Senior Tech 250+ Posts
    Join Date
    Aug 2012
    Posts
    276
    Rep Power
    28

    Re: MPC6502

    Yep had this before, check the IH coil connector it will not be plugged in correctly to the harness.

    More than likely they have broken the clip that holds it in place

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here