C5503 /w Fiery E-22C - Max print size

[Stormhammer]

Installing the Pro C5100S E-22B Fiery drivers for PS fixed it as the video nugget stated.

[anpetros]

Change SP 5150-001 to 1. This changes the maximum length for the bypass from 600mm, 26.3 inches, to 1260 mm, 49.6 inches. Apparent the fiery picks this setting up from this setting. If you have access to TSRC there is a video nugget.

I need your help on something concerning the long paper size.I have an mpc 7501 with an E-7200 fiery.When i enter 600mm long paper (which the driver lets me to) the display says: ''invalid paper size was specified.Press reset to continue''. Of course i have set the sp 5051 to 1 and all the patches to the fiery controller.If you have any idea what i am missing would you be kind enough to share it with me?

[davel]

You are missing a clean machine, get rid of the toner spitting beast.

[slimslob]

I need your help on something concerning the long paper size.I have an mpc 7501 with an E-7200 fiery.When i enter 600mm long paper (which the driver lets me to) the display says: ''invalid paper size was specified.Press reset to continue''. Of course i have set the sp 5051 to 1 and all the patches to the fiery controller.If you have any idea what i am missing would you be kind enough to share it with me?

This is a 3 year old thread. Start a new one grave robber.

[Stormhammer]

This is a 3 year old thread. Start a new one grave robber.

This thread is so old I don't even work on MFD's or printing equipment anymore.

That's pretty old.

[anpetros]

This is a 3 year old thread. Start a new one grave robber.

Thanks.Since Trump made America great again you have new machines.But there are other countries which still work with those dinosaurs.So could you please be so kind, to give me any feedback info?After all this is the forum made for ,helping colleagues from around the world with our precious knowledge ,isn't it?

[Phil B.]

Thanks.Since Trump made America great again you have new machines.But there are other countries which still work with those dinosaurs.So could you please be so kind, to give me any feedback info?After all this is the forum made for ,helping colleagues from around the world with our precious knowledge ,isn't it?

we have always had new releases on ALL models.....

Don't try to shove your problem in Trumps lap.....

we here in the USA have given aid to other countries... most times the LEADERS of those sh!thole countries kept the money and didn;t help their citizens.

[slimslob]

Thanks.Since Trump made America great again you have new machines.But there are other countries which still work with those dinosaurs.So could you please be so kind, to give me any feedback info?After all this is the forum made for ,helping colleagues from around the world with our precious knowledge ,isn't it?

I did not say that it was an old machine. I said that it was a 3 year old THREAD.

I did not say buy a new machine. If you really want assistance, start a new thread. If you do not know how, find out. It's right at the top of the page when you open a Forum.