hi guys i had this message i installed a new printer/scanner sd card original.with known that machine worked before without that function. is upgrade is a clue.
hi guys i had this message i installed a new printer/scanner sd card original.with known that machine worked before without that function. is upgrade is a clue.
Have u confirmed that sd card okay or not?
Did you install the entire Printer/Scanner kit or just the SD card and the key tops. Printer/Scanner requires the installation of additional memory that is included in the kit.
additional dimm already placed in sluts. 2 ram already exist .just sd card
Printer/Scanner requires 2 128MB DIMM and 1 256MB DIMM in addition to the memory already existing on the machine.
memory.pdf
today i upgrade firmware and the same issue still appeared .i swapped sd from another machine. the message gone .but printer and scanner application not appeared .i did 5985 and all being correct. what's the point . all dimm ram 256 and 2 ram 128 in mother board.
Does the SD card have a "lock" on it, I haven't had to install one but just curious if it is in locked position if that would matter.
it's on unlock position .
thank yo guys lane board is not exist.
Bookmarks