Dislikes:
0
-
mp2001 experience
Hello there!
mp2001 in our field seems to jam a lot, even with brand new machines...
What are your experiences?
-
Re: mp2001 experience
Hi there!
The greatest problem was the guide-plate over the fusing-unit. On 1/4 of our machines, the guide was bent, so we have to order new ones. After sending the bent parts (production was bad!) it looks OK now. Another problem is the new toner, which goes on the tip of the stripper-pawls in the fuser, producing awful noise. Changing them to the pawls of the 2020series the noise disapears.
Greetings...
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks