Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Ricoh mp 6001

  1. #1
    Senior Tech 100+ Posts
    Join Date
    Mar 2013
    Location
    sibu,sarawak
    Posts
    108
    Post Thanks / Like
    Rep Power
    0

    Ricoh mp 6001

    Hello fren,anyone can tell me what problem mp 6001.while I press the green lights button power save to turn off machine.but it keep light blinking.it wont turn off.I afraid direct off Off button,it will damage hdd and ram.thank help


  2. #2
    Field Supervisor 5,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    6,337
    Post Thanks / Like
    Rep Power
    139

    Re: Ricoh mp 6001

    Turn it back on and wait one minute. Then try to turn it off. If the indicator continues to flash, let it flash for at least 20 seconds or more then turn off the main power.


  3. #3
    Senior Tech 100+ Posts
    Join Date
    Mar 2013
    Location
    sibu,sarawak
    Posts
    108
    Post Thanks / Like
    Rep Power
    0

    Re: Ricoh mp 6001

    No,I mean the indicator light flash more than 20 min still flash,it won't off.like that how can directly turn off main power? Normally indicator light will turn off just can off main power.what problem at situation like that make it non stop flash,how to solve it. Pls help me,thanks at lot


  4. #4
    Technician
    Join Date
    Sep 2015
    Posts
    30
    Post Thanks / Like
    Rep Power
    4

    Re: Ricoh mp 6001

    Seems possible damage to the hard drive or damage to the controller or ram. Try switching the machine off at the power switch in the front door and pulling out the plug. Then put the plug in, followed by holding down your # and * keys together and the turning on the switch in the front door. This should take you into a diagnostics mode and will take long to go through the process, just wait and see what it says.

    You might need to call in a technician. If you are a technician (but I doubt that you are) try testing 1 by 1 , by doing the following, (1) disconnecting the hard drive,or (2) Removing RAM and seeing if it might start up. You will need to pull the plug out in all cases and then plug in and switch. Please remember all safety at all times.

    Kind Regards

    Please again be safe. Call a technician if you just a end user.


  5. #5
    Senior Tech 100+ Posts
    Join Date
    Mar 2013
    Location
    sibu,sarawak
    Posts
    108
    Post Thanks / Like
    Rep Power
    0

    Re: Ricoh mp 6001

    U mean hold down or press together button * # then power on switch?


  6. #6
    Senior Tech 100+ Posts
    Join Date
    Mar 2013
    Location
    sibu,sarawak
    Posts
    108
    Post Thanks / Like
    Rep Power
    0

    Re: Ricoh mp 6001

    After pressing both # * then On power, what next step should I do? Disconnect hard disk then need to connect before I on machine? How about ram,also pull out before on power?


  7. #7
    Field Supervisor 5,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    6,337
    Post Thanks / Like
    Rep Power
    139

    Re: Ricoh mp 6001

    Quote Originally Posted by andywong90 View Post
    No,I mean the indicator light flash more than 20 min still flash,it won't off.like that how can directly turn off main power? Normally indicator light will turn off just can off main power.what problem at situation like that make it non stop flash,how to solve it. Pls help me,thanks at lot
    If it has been flashing for 20 minutes, go ahead and turn off the main switch.


  8. #8
    Senior Tech 100+ Posts
    Join Date
    Mar 2013
    Location
    sibu,sarawak
    Posts
    108
    Post Thanks / Like
    Rep Power
    0

    Re: Ricoh mp 6001

    If it had been flashing more than 20 min go ahead turn off main power,it may be damage hard disk or ram? But usually indicator light flash awhile,it will stop flashing,that time just can off main switch,izzit right? Thanks


  9. #9
    Field Supervisor 5,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    6,337
    Post Thanks / Like
    Rep Power
    139

    Re: Ricoh mp 6001

    By the time the indicator has been flashing for at least 30 seconds, the HDD has parked its head and spun down. RAM is not going to be damaged. If anything turning the main switch and allowing the power supply capacitors to fully discharge will clear the memory error that is causing the machine to think that a fan somewhere is still on. That is why is keeps flashing, it thinks something, usually a fan, is still running.


  10. #10
    Technician
    Join Date
    Sep 2015
    Posts
    30
    Post Thanks / Like
    Rep Power
    4

    Re: Ricoh mp 6001

    just try this,
    switch off at main switch in the door
    pull out plug
    wait 1 min
    put plug in
    hold down both # and * keys
    switch on
    keep holding down # and * keys for about 30 secs
    this should start diagnostics mode and machine will run a self test
    if it picks up a fault it will tell you

    if that doesnt work and you are fully qualified technician
    switch machine off
    remove plug
    unplug hard drive
    plug in and switch on
    see if the machine now starts up
    If the machine starts up then hard drive is gone.

    if that doesnt work a
    switch machine off
    remove plug
    remove RAM
    plug in and switch on
    see if the machine now starts up
    If the machine starts up then RAM is gone

    try that

    Please be safe and follow precautions


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here