Can anyone help me how to solve sc220.thanks
Can anyone help me how to solve sc220.thanks
220 Laser synchronization detection error B246
The 1st laser synchronization detection unit could not detect the line synchronization signal (DETP0) within 500 ms while the polygon mirror motor was operating at normal speed. Note: The unit polls for the signal every 50 ms. This SC is issued after the 10th attempt fails to detect the signal.
• Laser synchronization boardconnector loose, broken, defective
• Laser synchronization detection board is not installed correctly (out of alignment)
• Laser synchronization board defective
• IPU defective
Also could be the poly mirror, laser emitter or door switches.
It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.
Hit it.
Ic,like that what should I do,or change laser assy for testing see how? Laser can repair or not?
Try cleaning the beam detect sensor.
I had few of these machines on field, with blown polygon motor causing SC220.
Replace laser diode for aficio 1060 to mp
Can i fix the 1060 diode to an Mp6000?
Inviato dal mio SM-G935F utilizzando Tapatalk
Memento Audere Semper
yes , replacing the diode complete with aluminum housing
You tried it on an Mp6500 and Mp6000?
Inviato dal mio SM-G935F utilizzando Tapatalk
Memento Audere Semper
Bookmarks