RICOH SP305SPF

[printertnc]

Buonasera
Ho una Ricoh RICOH SP305SPF configurata e installata al cliente a Settembre2016
A distanza di due mesi ogni tanto compare l'errore SC452, ho controllato e tutto sembra essere ok.
L'errore si presenta RANDOM, quale pezzo devo sostituire?
Il rullo di trasferimento Carta, o il rullo di trasferimento?
Grazie

Good evening
I have a Ricoh RICOH SP305SPF configured and installed at the customer Settembre2016
A two-month away every now appears the SC452 error, I checked and everything seems to be ok.
The error occurs RANDOM, which piece should I replace?
The transfer roller paper, or the transfer roller?
Thank you

[slimslob]

In a color machine, SC 452 has to do with the contact motor for the color transfer rollers in the ITB not being detected back at home position within the allotted time. Every time I have had it, it has been a dirty home position sensor.

In una macchina di colore, SC 452 ha a che fare con il motore di contatto per i rulli di trasferimento del colore della ITB non essere scoperti torna a posizione iniziale entro il tempo assegnato. Ogni volta che ho avuto, è stato un sensore di posizione casa sporco.

[copier tech]

I have this exact same issue, on mine when the customer clears a jam they don't close the door firmly enough at the rear, then the PTR retraction motor cant drive the PTR unit & throws SC452.

You may want to check that.

[printertnc]

Attention

On Manual

SC452

Paper transfer belt contact motor error
The paper transfer belt contact motor drives beyond the specified time during
home position detection or contact operation.
• Broken harness or defective connectors
• Disconnected connector of paper transfer belt contact sensor or motor
• Defective paper transfer belt contact motor
• Paper transfer belt unit not installed
1. Check and replace the harness and connectors.
2. Replace the paper transfer belt contact motor.
3. Reinstall the paper transfer belt unit.

Can i replace paper transfer belt?

Thanks




Thanks

[bpred]

Udklip.JPG

Just a comment to old thread.