Hello
I have a Ricoh Aficio MP C3600. After a couple of prints the back of the machine seems to get HOT and starts to prints blurry and smudged. can anyone direct me in the right direction to solve this problem?
Thank You
Glen
Hello
I have a Ricoh Aficio MP C3600. After a couple of prints the back of the machine seems to get HOT and starts to prints blurry and smudged. can anyone direct me in the right direction to solve this problem?
Thank You
Glen
Thank You,
Glen Bennett
Depending on what you mean by the back of the machine, it probably will get hot as that machine uses heat to fuse the toner to the paper, and the fusing unit is in a place that could be considered the back of the machine. The toner fusing in a wide format machine is rather large.
As for the print defect, it could be the paper you are printing on. Or maybe worn out developer or an arcing corona. But as I cannot see the problem I'm not sure.
Bookmarks