Originally Posted by
DanaNL
Problem is solved, the Ricoh Technician did the same as i did the only thing is its right now working........
i have checked the steps 3 times and it was al good but did not work. i think he has magic hands....
for in the future the solution will be
change the baudrate to 9600 in SP 1-105-006 change the value to 0.1.0.0
====================SP 1-106-007 change the value to 0.1.0.0
SP 1-104-002 change the value to 0
Kudos to you for helping me with this. I just wanted to note that the second switch to change should be 1-105-007 instead of 1-006-007. Keep the same value. Final settings would look like this:
Code:
SP 1-105-006 change the value to 0.1.0.0
SP 1-105-007 change the value to 0.1.0.0
SP 1-104-002 change the value to 0
Also, the PDF submitted by guitar9199 on the first page of the thread was helpful too. Thanks and kudos to both!
Bookmarks