Ricoh 2051 with shadow to next copy

**rudysemira** · 01-10-2017

Originally Posted by slimslob

I am the one who originally placed that .pdf on CTN. It will not help with off setting and definitely will not be useful on a B/W machine. It's main purpose is to reduce toner hazing and dirty charge rollers.

thank you this information....Sir

**rudysemira** · 01-10-2017

Originally Posted by jonhiker

check the condition of the fusing unit. a dirty or worn hot roller could also be the cause.

Yes, you right sir it is dirty and worn out the hot roller...now its working..

**rudysemira** · 01-10-2017

[QUOTE=slimslob;546625]First are you talking about the Aficio 2051 B/W machine or the MP C2051 color machine?

If it is the B/W machine, did you replace the cleaning blade and cleaning brush? If so, did you use Genuine Ricoh parts or after market parts? I have had problems with after market cleaning blades being either too rigid and damaging the drum surface or to soft and not thoroughly cleaning the drum surface.

the machine aficio 2051 b/w .... i dont know the history about the machine coz the staff not telling the truth what is the previous problem so i replaced the drum. The problem before when i make a copy the density black is uneven or not balance the rear and front and also have scratches, so according to what i have read i replaced the drum and also the developer and i followed the instruction manual steb by step...for finalizing i make a copy and that problem appear....but now is working good i saw there is a problem also from hot roller and the gear from the web cleaning roller......thanks for this info..