I have an mp 6000 first copy or print out is blurry down 1 side but all following are ok
this happins when coming out of sleep mode.
I have an mp 6000 first copy or print out is blurry down 1 side but all following are ok
this happins when coming out of sleep mode.
What sort of count do the PM parts have on them? Could be a cleaning problem, sticky blade perhaps.
It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.
Hit it.
Depending on the humidity level of the environment, it could be condensation forming on the drum.
NEVER ASSUME ANYTHING
typical issue with old ricoh's. Cold start, warm start issue...
There was a RTB for an old model, which I don't remember anymore...
There was an SP mode that should be changed; I think it was in the manner of which way the fusing lamp get it's power:
linear or ???
Firmware upgrade might help.
You can test to put the machine main switch off in stead of let in go in eco mode, same issue?
Get out your vac
PCU and Developer Probably needs a good Douching
Bookmarks