Dislikes:
0
-
Re: MPC 2503 Toner end even after new toner fitted
FYI the solution for this was to replace the K toner hopper, the feed screw was broken.
Thanks all for advice.
IMG_3964.jpgIMG_3965.jpgIMG_3966.jpg
-
Re: MPC 2503 Toner end even after new toner fitted
Originally Posted by
copier tech
I've had this happens once already but one other time it was due to somebody at run up setting the wrong value for toner threshold.
They set it to 100 instead of 10
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks