Ricoh aficio MPC 2051 problems printing on Photo paper

[sturmtrooper]

Sounds like you need to adjust customer settings with a 2x4.

Just about every machine will run slower when running thick paper, it's the nature of the beast. Looks like you've already done what you can actually do to make the machine function with what they want.

[COPYDOCAZ]

thanks guys for all the good advice I will just deal with it and smile, I will also send him a copy of the op guide.

[slimslob]

...the ONLY Gloss paper that I have run thru a color laser printer has been GLOSSY BROCHURE PAPER FOR LASER! It is coated with CLAY to give it the gloss!...You have to slow the speed waaay down and ramp the heat up on the fuser! I have been successful before but BECAUSE of the high heat retention properties of the clay in the paper, you have to have someone at the machine to snatch the paper out of the output tray....if you don't, you will have a stack of paper with sheets stuck together since the toner is still tacky on the hot paper!...you might be able to point a small fan at the tray to cool the paper as it's coming out! I stopped using the clay based paper since it is a PITA...now I just use a 34+ Lb matte finish paper which works fine and I don't have to worry about the heat build up issue!

Staples a has a number on Laser Glossy paper.
glossy laser paper

[COPYDOCAZ]

Thank you all for your comments they have been very helpfull