Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Trusted Tech 50+ Posts Batman1976's Avatar
    Join Date
    Jun 2016
    Location
    London
    Posts
    83
    Rep Power
    16

    Ricoh MP902 - C/Q Blur on lead edge

    Hi,

    Can anyone help me with a strange Blurring issue on a Ricoh MP9002?

    The blur appears mainly at the lead edge, but is intermitten and moves every time. The machine is high volume and in a print room enviroment.

    Dev, Drum, Cl blade, brush, Transfer belt and blade, charge unit, Upper and lower fuser rollers, drum drive shaft and bracket have all been replaced.

    The following units have been swapped with a different device and the problem is still present:

    Complete Drum unit,
    Dev unit,
    Transfer unit,
    Fuser Unit.

    Drum drive has been stripped down, cleaned and lubricated.

    Any one had this or simular fault, any input would be gladly recieved before I push it out of the window!!

    Thanks in advance
    Batman

  2. #2
    Senior Tech 250+ Posts fbkhan3's Avatar
    Join Date
    May 2012
    Posts
    415
    Rep Power
    30

    Re: Ricoh MP902 - C/Q Blur on lead edge

    As you have done most of the Unit swapping, I would go for the Power packs, rusty charger connections,bad ger tooth in the Dv or Drum drive.


    Regard's

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here