Thanks:
0
Likes:
0
Dislikes:
0
-
Trusted Tech
50+ Posts
- Rep Power
- 16
Ricoh MP902 - C/Q Blur on lead edge
Hi,
Can anyone help me with a strange Blurring issue on a Ricoh MP9002?
The blur appears mainly at the lead edge, but is intermitten and moves every time. The machine is high volume and in a print room enviroment.
Dev, Drum, Cl blade, brush, Transfer belt and blade, charge unit, Upper and lower fuser rollers, drum drive shaft and bracket have all been replaced.
The following units have been swapped with a different device and the problem is still present:
Complete Drum unit,
Dev unit,
Transfer unit,
Fuser Unit.
Drum drive has been stripped down, cleaned and lubricated.
Any one had this or simular fault, any input would be gladly recieved before I push it out of the window!!
Thanks in advance
Batman
-
Re: Ricoh MP902 - C/Q Blur on lead edge
As you have done most of the Unit swapping, I would go for the Power packs, rusty charger connections,bad ger tooth in the Dv or Drum drive.
Regard's
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks