Thanks: 
Likes: 
Dislikes: There seems to be no parts number for belt only.
Has anyone tried to put an itb belt from a mpc3002 (or so???).
Thank you for your answer.
There seems to be no parts number for belt only.
Has anyone tried to put an itb belt from a mpc3002 (or so???).
Thank you for your answer.
The "SPC" printer machine versions are designed to have consumable replicable parts, e.g complete fuser & ITB not belt only & fuser sleeve.
However yes the 3002 belt is identical so simply replace that, however the spc units are quite cheap so you may find the 3002 belt only costs nearly the same!
On another note you can fit the complete fuser & ITB unit from the SPC830 into the mpc3002 (with a simple mod) again because they are cheaper than replacing the individual parts.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Originally Posted by Mark Bbb
the part number for the compatable belt only is B22361630,this will sort your problem
No match on that number. There is 1 digit to much...
Sorry typo B2236130 Apologies.
Thank you. That number is the belt for mpc2500. Do you also use this belt in a mpc3002?
Posting Permissions
Reply With Quote
Bookmarks