Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Service Manager 1,000+ Posts
    Savin C9120 Grinding

    Brian8506's Avatar
    Join Date
    Feb 2009
    Location
    New Jersey
    Posts
    1,588
    Rep Power
    62

    Savin C9120 Grinding

    It sounds like it's from the fuser but it all looks good mechanically. Doesn't always do it. I was going to replace the fuser only to find out that they're in excess of $1200. Anything common out there? I appreciate any help

  2. #2
    Service Manager 2,500+ Posts
    Savin C9120 Grinding

    sandmanmac's Avatar
    Join Date
    Feb 2009
    Location
    Toronto, ON
    Posts
    3,885
    Rep Power
    159

    Re: Savin C9120 Grinding

    Quote Originally Posted by Brian8506 View Post
    It sounds like it's from the fuser but it all looks good mechanically. Doesn't always do it. I was going to replace the fuser only to find out that they're in excess of $1200. Anything common out there? I appreciate any help
    Very common, and lots of threads.
    Here's one from a few years ago, that's was resurrected just a couple days ago:
    MPC2551 noisy fuser

  3. #3
    2020 Retired 50+ Posts
    Join Date
    Sep 2016
    Location
    Kitchener
    Posts
    76
    Rep Power
    16

    Re: Savin C9120 Grinding

    $1200 for a MP C2550 or a 2551 fuser?
    I don't think so.
    Maybe for a 3260C or a 6000 fuser.

  4. #4
    Service Manager 1,000+ Posts
    Savin C9120 Grinding

    Brian8506's Avatar
    Join Date
    Feb 2009
    Location
    New Jersey
    Posts
    1,588
    Rep Power
    62

    Re: Savin C9120 Grinding

    Quote Originally Posted by DougD View Post
    $1200 for a MP C2550 or a 2551 fuser?
    I don't think so.
    Maybe for a 3260C or a 6000 fuser.
    Precision Roller $1245. Entire fuser not belt assembly


    Sent from my iPhone using Tapatalk

  5. #5
    Service Manager 1,000+ Posts fshead's Avatar
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    2,339
    Rep Power
    80

    Re: Savin C9120 Grinding

    Quote Originally Posted by Brian8506 View Post
    Precision Roller $1245. Entire fuser not belt assembly


    Sent from my iPhone using Tapatalk

    if you pull the unit apart i would take a big piece of cardboard and make notes on it as you remove screws.
    as far as 1200 for a fuser i would just buy a parts machine local with super low meter if the fuser is just toast...
    if you need where to find just drop me an email.

  6. #6
    Service Manager 1,000+ Posts
    Savin C9120 Grinding

    Brian8506's Avatar
    Join Date
    Feb 2009
    Location
    New Jersey
    Posts
    1,588
    Rep Power
    62

    Re: Savin C9120 Grinding

    Quote Originally Posted by fshead View Post
    if you pull the unit apart i would take a big piece of cardboard and make notes on it as you remove screws.
    as far as 1200 for a fuser i would just buy a parts machine local with super low meter if the fuser is just toast...
    if you need where to find just drop me an email.
    Thanks for all the replies and help. I do have a source to get her use the copier. I'm just trying to avoid that if I can.

  7. #7
    Service Manager 1,000+ Posts
    Savin C9120 Grinding

    Brian8506's Avatar
    Join Date
    Feb 2009
    Location
    New Jersey
    Posts
    1,588
    Rep Power
    62

    Re: Savin C9120 Grinding

    Quote Originally Posted by fshead View Post
    if you pull the unit apart i would take a big piece of cardboard and make notes on it as you remove screws.
    as far as 1200 for a fuser i would just buy a parts machine local with super low meter if the fuser is just toast...
    if you need where to find just drop me an email.
    My biggest fear is that it will just happen again after reading the replies


    Sent from my iPhone using Tapatalk

  8. #8
    Field Supervisor 500+ Posts
    Savin C9120 Grinding


    Join Date
    Oct 2007
    Location
    San Diego, CA
    Posts
    969
    Rep Power
    47

    Re: Savin C9120 Grinding

    Quote Originally Posted by Brian8506 View Post
    My biggest fear is that it will just happen again after reading the replies


    Sent from my iPhone using Tapatalk
    and that is why you want to change these settings. And this has stopped the noise on all but 1 of this series that I have tried:

    SP1-121-001 ([Switch:Rotation Start/Stop] Time:After Reload) [100] →[0]
    SP1-121-002 ([Switch:Rotation Start/Stop] Time:After Recovery) [10] →[0]
    SP1-121-003 ([Switch:Rotation Start/Stop] Time:After Job) [10] →[0]



  9. #9
    Service Manager 1,000+ Posts fshead's Avatar
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    2,339
    Rep Power
    80

    Re: Savin C9120 Grinding

    Quote Originally Posted by Brian8506 View Post
    My biggest fear is that it will just happen again after reading the replies


    Sent from my iPhone using Tapatalk
    look all parts have a certain life cycle and if this customer is doing 10k a month on it it will not hold up.
    i have a bunch of these and the previous series mpc2050/mpc2550 and they work well in the less than 5k/month enviroment..
    I am happy when i get a chargeable fuser rebuild call,now if its on contract i wld pop in a parts unit and do the same
    wth transfer belt and drums..it makes it worth the cost to store a low meter parts machine

  10. #10
    Service Manager 1,000+ Posts
    Savin C9120 Grinding

    Brian8506's Avatar
    Join Date
    Feb 2009
    Location
    New Jersey
    Posts
    1,588
    Rep Power
    62

    Re: Savin C9120 Grinding

    Quote Originally Posted by copyaction View Post
    and that is why you want to change these settings. And this has stopped the noise on all but 1 of this series that I have tried:

    SP1-121-001 ([Switch:Rotation Start/Stop] Time:After Reload) [100] →[0]
    SP1-121-002 ([Switch:Rotation Start/Stop] Time:After Recovery) [10] →[0]
    SP1-121-003 ([Switch:Rotation Start/Stop] Time:After Job) [10] →[0]


    I'll try that first. Thanks


    Sent from my iPhone using Tapatalk

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here