Ricoh MP 4002/5002 Web GUI password reset

[sandmanmac]

Ihavedeleted

Thank you

[tufbnme]

Too late.

Now your in deep, too late means too bad.

[slimslob]

Figured it out SP5846-46. I also tried the Hex editor method, unsuccessful there. Thank you all


-havokprod

That will only reset admin and supervisor to factory default and clear address books.

[Zoran]

A
replace nvram

B1
the copier without PASSWORD
1. Turn the main power switch ON.2. Access SP5990-001 and print out all data lists.
2. Turn the main power switch OFF.
3. Insert the SD card into the lower slot on the controller box.
4. Turn the main power switch ON.
5. Upload the NVRAM data (SP5-824-001) onto the SD card.
6. Turn the main power switch OFF.
file on the SD card will have the name of the case V6903000073.nv
B2
the copier PASSWORD
1. Turn the main power switch ON.2. Access SP5990-001 and print out all data lists.
2. Turn the main power switch OFF.
3. Insert the SD card into the lower slot on the controller box.
4. Turn the main power switch ON.
5. Upload the NVRAM data (SP5-824-001) onto the SD card.
6. Turn the main power switch OFF.
file on the SD card will have the name of the case V6903000111.nv
files preserve
files preserve

B3

the correct file witout pasforda (V6903000073.nv)
change the name in (V6903000111.nv)

1. Insert the SD card into the lower slot on the controller box.
2. Turn the main power switch ON.
3. Download the NVRAM data (SP5-825-001) stored on the SD card .
4. Turn the main power switch OFF.
5. Remove the SD card from the lower slot in the controller box.
6. Turn the main power switch ON.
7 Access SP5-811-001 and program the machine serial number.8. Access SP5-811-004 and program the BCU serial number.
9. Hdd format..



If not
replace the old NVRAM settings.