Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 19
C6502 - Machine indicates cover open but does not show which cover
As the subject states, the machine has some sort of false open cover state. The machine was operational when I first approached it and I managed to check the door switches which all seem to work. It seems to me that when I opened the drawer and started poking around the fuser is what tripped it into that state again. Firmware level is good. Perhaps it is an electrical fault?
-
Re: C6502 - Machine indicates cover open but does not show which cover
Check the D2 Blue lever handle,sensor next to that.
-
Senior Tech
100+ Posts
- Rep Power
- 19
Re: C6502 - Machine indicates cover open but does not show which cover
That was precisely what it was. I missed the tech bulletin on this it seems.
-
Junior Member
- Rep Power
- 0
Re: C6502 - Machine indicates cover open but does not show which cover
ricoh 1075 cover is open as shown message but all the doors are closed
-
Re: C6502 - Machine indicates cover open but does not show which cover
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks